The Himin 200L closed-loop pressurized evacuated tube solar water heater uses indirect heat exchange to keep the ethylene glycol heat-transfer fluid in the collector loop separate from the domestic water stored in the tank. Domestic water does not flow through the evacuated tubes. The solar water heater system features 22 evacuated tubes measuring Ø58 × 1,800 mm, an enamelled steel inner tank, polyurethane insulation and a 2,000 W electric backup heater. A PV-powered heat dissipation system releases excess heat during periods of high solar input, while a microcomputer controller manages system operation for residential hot water use.
The closed-loop pressurized evacuated tube solar water heater is suitable for rooftop installation on single-family homes, villas and rural homes, providing hot water for daily household use.
Residential Rooftop
Self-Built House
High-End Villa
High-End Villa
| Model | |
| Tank Capacity | 200 L |
| Collector Type | Evacuated Tube |
| Heat-Transfer Method | Closed-Loop Indirect |
| Tube Dimensions | Ø58 × 1,800 mm |
| Number of Tubes | 22 pcs |
| Rated Tank Pressure | 0.70 MPa (7 bar) |
| Electric Heater Power | 2,000 W |
| Power Supply | 220 V AC, 50 Hz |
| Rated Current | 9.09 A |
| Inner Tank Material | Enamelled Steel |
| Housing Material | Galvanized Steel |
| Insulation Material | Polyurethane |
| Control System | Microcomputer Control |
| Operating Language | English |
| App Control | No |
| Installation | Freestanding |
| Overall Dimensions | 2,045 × 1,603 × 1,882 mm |
| Weight | 166 kg |
Main storage tank, evacuated collector tubes, mounting brackets, circulation pump, heat-dissipation radiator, temperature and pressure relief valve (T&P valve), smart controller, ethylene glycol-based solar heat-transfer fluid, and fasteners.
Quantities and the exact scope of supply depend on the configuration specified in the order.